Water Heater Sudden Failure: Handling the Right Steps

Water Heater Sudden Failure: Handling the Right Steps

Blog Article

Click For More Information

Just about every person has their unique idea involving No Hot Water — Water Heater Repair.

Many modern-day homes use an electric hot water heater for their heating unit, due to its benefit as well as simplicity of use. However, much like any other electrical appliances, troubles might emerge with its use, suddenly. It can be truly aggravating to wake up to a cool shower as opposed to a warm one or having your bathroom with water that isn't warm sufficient or even too hot. Whatever the instance may be, hot water heater problems can be quite nerve-racking. Fortunately, we have actually made a checklist of feasible remedies to your water heater issues. There are a number of factors that can create many of these troubles, maybe a problem with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for safety. Whatever the trouble is, getting it taken care of ought to not pose way too much of an issue if you comply with these steps:

Call A Professional:

If after changing all malfunctioning parts and also resetting your temperature, the hot water heater still isn't working, you might require to get in touch with a specialist plumber for a specialist point of view. The problem with your heating system could be that the hot and cold faucets have been switched or it may be undersized for the amount of warm water required in your house. Whatever the instance may be, a specialist plumber would assist solve the trouble.

Check Your Power Supply:

As fundamental as this might seem, it is extremely necessary. Without appropriate power, your water heater will not operate. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power issue. Examine if the fuse is blown out or the circuit breaker stumbled. If the breaker is the issue, just turn it on and off once more. Replace any type of damaged or damaged fuse. Test the home appliance with power after these adjustments to see if it's currently functioning.

Check Your Thermostat:

If your water heater still isn't functioning or the water appearing isn't warm enough, you may need to inspect the temperature level settings on your top thermostat. Ensure the circuit breaker is turned off prior to doing anything. Open up the access panel and press the red button for temperature reset over the thermostat. This ought to assist warm the water. Turn the circuit breaker back on as well as examine if the trouble has been fixed.

Examine the Burner in the Hot Water Heater:

If it's not a power problem, then try looking into your burner if it is still functioning. Test each of your heating elements to be sure the issue isn't with any of them. If any one of them is damaged, change that component and then check whether the hot water is back on.

Conclusion

Water heater issues are not always major. A lot of them are because of minor issues like a blown fuse or worn-out heating element. Replacing the defective components must work. Nonetheless, if you are still incapable to address the problem, give a call to your nearest plumber to come to get it repaired.

Common Reasons Why Your Hot Water Heater Isn’t Working

Water Gets Too Hot

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

Water Doesn’t Get Hot

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

Leaking Water Heater

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

Noisy Water Heater

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

Pilot Light Keeps Going Out

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

Water Smells Bad

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

Water Looks Brown Or Rusted

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

As a fervent reader about What Would Cause My Electric Water Heater to Stop Working?, I think sharing that piece of writing was worth the trouble. For those who appreciated our post plz be sure to pass it around. We enjoy reading our article about What Would Cause My Electric Water Heater to Stop Working?.

We're ready, dial now!

Report this page